It is better to paint the furnace or spray

Furnace powder paint

study time 1 minute

It is better to paint the furnace or spray

☑️ Furnace Color

With the progress in the painting industry, it is possible to paint different types of items, including small decorative items and heavy and large objects with powder paint. In the past, this method was only used for mass production, but today it can be For all the items, he used the color of the oven. Application equipment for powder coating is more expensive than wet paint systems. The purchased paint is in the form of powder, hence it is also called powder paint. This powder temporarily adheres to the metal with an electrostatic attraction. (As you rub a balloon on your hair and watch it stick to the wall, the powder grains stick to the workpiece.) One of the most expensive tools required for painting is a gas stove, because it must heat the piece to a higher temperature, about 200 degrees Celsius.

☑️ Powder color advantages:

Properly applied powder coating is harder than other available paints. This means that the coating will not scratch or discolor with normal knocks. No solvents are used during the application of the paint and therefore it is more compatible with nature. Due to the requirement in the implementation by the factory, it has more adhesion to the part and this causes the paint to be more resistant to corrosion and scratches. It creates more waterproof properties than liquid paint. Therefore, it provides better protection against corrosion. To hide metal defects, powder coating can be done in two layers. Cheaper price than other methods. Good quality powder coatings with high gloss are available. It is easily washed. Powder coating can be combined, polished and waxed like any other color.

☑️ Spray or Pyolawal Color

Advantages of spray painting: It can be a good ending. Applicable in smaller environments Easy to use and requires minimal equipment.

☑️ What should be stored in furnace coloring

One layer of powder is not enough, your paint must have a primer. Do not allow aluminum components to be removed from the powder coating by blasting alone. It must be chemically cleaned first, otherwise the paint will become pitted.

Mrs. Javadzadeh

Mrs. Javadzadeh

نویسنده پست

9991

مقاله

مشاهده صفحه

  • ☑️ Furnace Color

  • ☑️ Powder color advantages:

  • ☑️ Spray or Pyolawal Color

  • ☑️ What should be stored in furnace coloring